40-Foot Double Gate Repair Done Right

A gate that won't line up or lock is more than just an annoyance. It's a security problem. And on a 40-foot double gate, that problem is multiplied - because there's a lot of weight, a lot of span, and a lot of stress on every hinge and post holding it all together.

Here's what we were working with: a large double gate that had shifted out of alignment and wouldn't latch the way it should. That kind of issue usually comes down to the posts. When posts aren't set properly - or when the concrete underneath starts to fail - the whole gate loses its reference point. Everything starts to drift.

We reset the posts, poured solid concrete, and got the alignment dialed back in. The latch hardware was adjusted so both panels meet cleanly in the center. No gap. No fighting with it to get it closed. It just works.

That's really what a gate repair comes down to - getting the fundamentals right. The frame, the posts, the concrete, the hardware. When all of that is solid, the gate does its job without any fuss. When even one piece is off, you end up with exactly what this customer was dealing with before we got there.

Big gates take more care to get right, but the standard doesn't change. Whether it's a small residential swing gate or a wide commercial double gate like this one, we approach every repair the same way - find the root cause, fix it properly, and make sure it holds.